High-Density Polyethylene Film Extrusion
Product Description:
HDPE F52H04 is a natural colored grade produced with the latest Mitsui CX slurry polymerization Technology exhibiting the following features:
- Excellent Mechanical Strength
- High Stiffness
- Excellent processability (at High Speed)
Grade Data Sheet
High-Density Polyethylene Film Extrusion
Product Description:
HDPE F52H04 is a natural colored grade produced with the latest Mitsui CX slurry polymerization Technology exhibiting the following features:
- Excellent Mechanical Strength
- High Stiffness
- Excellent processability (at High Speed)
HDPE F52H04 is recommended for the following applications:
- Tissue-like films
- Garment/Grocery/merchandise bags
- Disposal waste bags
- Shopping/Counter bags
Typical Properties:
| Sr. No. Properties Test Method Units Values* | ||||
| Physical Properties | ||||
| 1 | Melt Flow Index ( 190oC & 2.16 kg) | ASTM D1238 | g / 10 min | 0.04 |
| 2 | Density (at 23 0C) | ASTM D1505 | gm/cm3 | 0.952 |
| Mechanical Properties | ||||
| 3 | Tensile Strength @ Yield | ASTM D638 | MPa | 27 |
| 4 | Tensile Strength @ Break | ASTM D638 | MPa | >24 |
| 5 | Elongation @ Break | ASTM D638 | % | >500 |
| 6 | Charpy Impact Strength | ISO 179-1 | KJ/m2 | NB |
| 7 | Hardness | ASTM D2240 | Shore D | 64 |
| 8 | ESCR (F50, 10% Igepal Soln. v/v) | ASTM D1693B | Hours | >500 |
| Thermal Properties | ||||
| 9 Vicat Softening Point (10N) ASTM D1525 0C 124 | ||||
| ** Mechanical Properties tested on Compression Molded type IV Specimen.
* Typical Values and not to be taken as specification limits, values may change without any prior notice. |
||||
Regulatory Requirements:
HDPE Film grade F52H04 shall meet the requirements stipulated in IS 10146:1982 on ‘Specification of Polyethylene for safe use in contact with Foodstuff, Pharmaceutical & Drinking water’. The grade and Additives incorporated in this grade shall meet the positive list of constituents as prescribed in IS 10141:1982. The Grade and the additives incorporated in it shall also comply with the FDA: CFR Title 21,177.1520, Olefin Polymers.
Storage & Handling:
Prevent Polyethylene Material from direct exposure to sunlight & heat to avoid quality deterioration. The storage location should be dry, dust free and the Storage temperature should not exceed 50 oC. Non – compliance to these precautionary measures can lead to degradation of the product causing Color changes, Odor & inadequate product performance.
Health and Safety Information:
The product described herein may require precautions in handling and use because of toxicity, flammability, or other consideration. The Material Safety Data Sheet (MSDS) contains the available product health and safety information for this material and can be found at www.opalindia.in. Before using any material, a customer is advised to consult the MSDS for the product under consideration for use.
F55HM0003
F55HM0003N
High Density Polyethylene for Film Extrusion
Application: F55HM0003/F55HM0003N is a blown film high-density polyethylene grade of high molecular weight, possessing bi-modal molecular weight distribution for better processability with excellent mechanical properties. The combination of high strength and excellent draw downability makes F55HM0003/F55HM0003N an ideal material for thin gauge film applications. It is recommended for film applications like, carry bags, shopping bags, trash bags, grocery bags industrial liners etc.
| Property | Values* | Unit | Test Method |
| Melt Flow Index (I2) | 0.09 | gm/10min | ASTM D1238 |
| Melt Flow Index (I21) | 13 | gm/10min | ASTM D1238 |
| Density | 0.955 | gm/cc | ASTM D1505 |
| Tensile Strength @Yield (MD/TD) | 350/290 | kg/cm2 | ASTM D882 |
| Tensile Strength @Break (MDTD) | 500/420 | kg/cm2 | ASTM D882 |
| Elongation @Break (MD/TD) | 400/500 | % | ASTM D882 |
| Vicat Softening Point | 124 | oC | ASTM D1525 |
| Dart Impact Strength | 7 | gm/mic | ASTM D1709 |
| Tear Strength (MD/TD) | 1/5 | gm/mic | ASTM D1922 |
* Typical characteristics of the product given purely as a guide. Film properties were determined on Film Thickness= 20 micron, BUR= 4.0
Processing Guidelines:
Barrel temperature: 180 – 2200C
Regulatory Information:
Certificate is available on request.
Packaging & Storage:
F55HM0003/F55HM0003N is available in natural colour/pellet form in 25 kg strong bags made of woven fabric. The product should be stored in dry conditions at temperature below 50oC and protected from UV light.
E45A003
High-Density Polyethylene for Blown Film Extrusion
Application: E45A003 is recommended to use in blend with LD/LLDPE in blown film extrusion for producing co-extruded laminated/ non laminated films for various applications. It has excellent processability with moderate stiffness.
| Property | Values* | Unit | Test Method |
| Melt Flow Index (I2) | 0.6 | gm/10min | ASTM D1238 |
| Density | 0.945 | gm/cc | ASTM D1505 |
| Tensile Strength @Break (MD/TD) | 400/350 | kg/cm2 | ASTM D 882 |
| Elongation @Break (MD/TD) | 750/900 | % | ASTM D 882 |
| Tear Strength (MD/TD) | 0.3/4 | gm/mic | ASTM D1922 |
| Dart Impact Strength | 1.8 | gm/mic | ASTM D1709 |
| Vicat softening point | 117 | 0C | ASTM D1525 |
* Typical characteristics of the product given purely as a guide. Mechanical properties were determined on 40 micron film made with 0.8 mm die gap and BUR: 3.0
Processing Guidelines:
Barrel temperature: 170 – 2100C
Regulatory Information:
Certificate is available on request.
Packaging & Storage:
E45A003 is available in natural colour/pellet form in 25 kg strong bags made of woven fabric. The product should be stored in dry conditions at temperature below 50oC and protected from UV light.
E52A003 / E52A003N
High Density Polyethylene for Pipe/Film Extrusion
Application: E52A003/E52A003N is recommended for pipe application like potable water, sprinkler, effluent and waste water systems, cable duct meeting the hydrostatic strength requirements as per IS 4984- 2016 for PE-63 material. The material conforms to natural resin designation PE EAN-C50 T-012 of IS: 7328-1992 and shall meet the same given in IS 4984:2016.
| Property | Values* | Unit | Test Method |
| Melt Flow Index (I2) | 0.22 | g/10min | ASTM D1238 |
| Melt Flow Index (I5) | 0.95 | g/10min | ASTM D1238 |
| Density | 0.954 | g/cc | ASTM D1505 |
| Tensile Strength @Yield | 240 | kg/cm2 | ASTM D638, Type IV |
| Elongation @Yield | 10 | % | ASTM D638, Type IV |
| Elongation @Break | >600 | % | ASTM D638, Type IV |
| Flexural Modulus | 10000 | kg/cm2 | ASTM D790 |
| Shore D Hardness | 62 | – | ASTM D2240 |
| Vicat Softening Point | 123 | oC | ASTM D1525 |
| ESCR (10% Igepol), F50 | >500 | hrs | ASTM D1693B |
| Izod Impact Strength | 120 | J/m | ASTM D256 |
* Typical characteristics of the product given purely as a guide. Mechanical properties were determined on compression moulded specimens.
Processing Guidelines: Barrel temperature: 170 – 2100C
Regulatory Information: Certificate is available on request.
Packaging & Storage:
E52A003/E52A003N is available in natural colour/pellet form in 25 kg strong bags made of woven fabric. The product should be stored in dry conditions at temperature below 50oC and away from UV light.
