- PP Molding
polypropylene, a synthetic resin built up by the polymerization of propylene. One of the important family of polyolefin resins, polypropylene is molded or extruded into many plastic products in which toughness, flexibility, light weight, and heat resistance are required.
Grades Data Sheet
Provisional Technical Datasheet
M12RR Polypropylene Homopolymer Injection Molding
Product Characteristics:
Polysure M12RR is Polypropylene Homopolymer, produced by latest Novolen Technology & Primarily suitable for General Purpose Injection Moulding, Furniture & Housewares applications. M12RR combines exceptional processability with low Cycle Time & excellent product aesthetics.
Recommended Applications:
M12RR is recommended for General Purpose Injection Moulding, Closures, Furniture, Housewares & Compounding.
Typical Properties:
| Properties | Test Method | UOM | Value |
| Melt Flow Index ( 230oC & 2.16 kg) | ASTM D 1238 | g/10 min | 12 |
| Tensile Strength @ Yield (50mm / min) | ASTM D638 | MPa | 34 |
| Tensile Elongation @ Yield (50mm / min) | ASTM D638 | % | 8 |
| Flexural Modulus | ASTM D790 | MPa | 1550 |
| Notch Izod Impact Strength ( 23oC) | ASTM D256 | J/m | 30 |
| Vicat Softening Point (10N) | ASTM D1525 | oC | 154 |
| Heat Deflection Temperature (0.455 MPa) | ASTM D648 | oC | 95 |
*All the mechanical properties as per ASTM D638 Type I Injection molded specimen prepared in accordance with ASTM D 4101
Processing Guidelines:
Barrel Temperature :180 – 280°C
Mold Temperature : 30 – 40°C
Storage & Handling:
Bags should be stored in dry & dust free environment at temperature below 50 oC and Prevent from direct exposure to sunlight & heat to avoid quality deterioration.
Regulatory Requirements:
M12RR is manufactured complying the requirements specified in IS on “Specification for Polypropylene & its Copolymers for safe use in contact with Foodstuff, Pharmaceutical & Drinking water”. Furthermore the Additives
added in this grade formulation compiles to the “Positive list of constituents of Polypropylene and its Copolymers in contact with Foodstuff, Pharmaceutical & Drinking water’ as laid down under IS 10909. In general the additives & constituents used in the grade are in line with requirement laid down under FDA: CFR Title 21,177.1520, Olefin Polymers.
Polypropylene Homo Polymer Injection Molding
Product Description:
PP Homo polymer MH13 is a natural colored high stiffness grade produced with the latest Ineos Gas Phase polymerization Technology exhibiting following features:
¸ Higher flow for easy processing.
¸ High Stiffness.
¸ Good dimensional stability
¸ Faster Molding cycle
PP Homo Polymer MH13 is recommended for following applications:
¸ Household articles
¸ Consumer Products
¸ Rigid Packaging
Typical Properties:
| Tested Properties | Test Method | UOM | Value |
| Melt Flow Index (2300C & 2.16 Kg) | ASTM D 1238 | gm/10 min | 13.5 |
| Density @ 23oC | ASTM D 1505 | gm/cm3 | 0.9 |
| Mechanical Properties | |||
| Tensile Strength @ Yield (50 mm/min) | ASTM D 638 | MPa | 35 |
| Elongation @ Break (50mm / min) | ASTM D 638 | % | 200 |
| Flexural Modulus (1.3 mm/min) | ASTM D790A | MPa | 1500 |
| Notched Izod Impact Strength @ 23oC | ASTM D 256 | J/m | 20 |
| Hardness (Rockwell) | ASTM D 785 | R Scale | 95 |
| Thermal Properties | |||
| Vicat Softening Point (10N) | ASTM D1525 | oC | 150 |
| Heat Deflection Temperature (0.46N/m2) | ASTM D648 | oC | 100 |
Regulatory Requirements:
PP Homo Polymer grade MH13 shall meet the requirements stipulated in IS 10910 on ‘Specification for Polypropylene and its Copolymers for safe use in contact with Foodstuff, Pharmaceutical & Drinking water’. The grade and Additives incorporated in this grade shall meet the positive list of constituents as prescribed in IS 10909. The Grade and the additives incorporated in it will also comply with the FDA: CFR Title 21,177.1520, Olefin Polymers.
Storage & Handling:
Prevent PP Material from direct exposure to sunlight & heat to avoid quality deterioration. The storage location should be dry, dust free and the Storage temperature should not exceed 50 o C. Non – compliance to these precautionary measures can lead to degradation of the product causing Color changes, Odor & inadequate product performance.
Health and Safety Information:
The product described herein may require precautions in handling and use because of toxicity, flammability, or other consideration. The Material Safety Data Sheet (MSDS) contains the available product health and safety information for this material and can be found at www.opalindia.in. Before using any material, a customer is advised to consult the MSDS for the product under consideration for use.
Polypropylene Homo Polymer Injection Molding
Product Description:
PP Homo polymer MH13A is a natural colored high stiffness grade produced with the latest Ineos Gas Phase polymerization Technology exhibiting following features:
¸ Higher flow for easy processing.
¸ High Stiffness.
¸ Good dimensional stability
¸ Anti-Static Property
PP Homo Polymer MH13A is recommended for following applications:
¸ Household articles
¸ Furniture Products
¸ Rigid Packaging
¸ Compounding
Typical Properties:
| Tested Properties | Test Method | UOM | Value |
| Melt Flow Index (2300C & 2.16 Kg) | ASTM D 1238 | gm/10 min | 12 |
| Density @ 23oC | ASTM D 1505 | gm/cm3 | 0.9 |
| Mechanical Properties | |||
| Tensile Strength @ Yield (50 mm/min) | ASTM D 638 | MPa | 35 |
| Elongation @ Break (50mm / min) | ASTM D 638 | % | 200 |
| Flexural Modulus (1.3 mm/min) | ASTM D790A | MPa | 1400 |
| Notched Izod Impact Strength @ 23oC | ASTM D 256 | J/m | 25 |
| Hardness (Rockwell) | ASTM D 785 | R Scale | 95 |
| Thermal Properties | |||
| Vicat Softening Point (10N) | ASTM D1525 | oC | 150 |
| Heat Deflection Temperature (0.46N/m2) | ASTM D648 | oC | 100 |
* Mechanical Properties tested on Injection molded specimen prepared in accordance with ASTM D 4101 and conditioned as per ASTM D 618
* Typical Values and not to be taken as specifications, values may change without any prior notice
Regulatory Requirements:
PP Homo Polymer grade MH13A shall meet the requirements stipulated in IS 10910 on ‘Specification for Polypropylene and its Copolymers for safe use in contact with Foodstuff, Pharmaceutical & Drinking water’. The grade and Additives incorporated in this grade shall meet the positive list of constituents as prescribed in IS 10909. The Grade and the additives incorporated in it will also comply with the FDA: CFR Title 21,177.1520, Olefin Polymers.
Storage & Handling:
Prevent PP Material from direct exposure to sunlight & heat to avoid quality deterioration. The storage location should be
dry, dust free and the Storage temperature should not exceed 50 o
C. Non – compliance to these precautionary measures can
lead to degradation of the product causing Color changes, Odor & inadequate product performance.
Health and Safety Information:
The product described herein may require precautions in handling and use because of toxicity, flammability, or other
consideration. The Material Safety Data Sheet (MSDS) contains the available product health and safety information for this
material and can be found at www.opalindia.in. Before using any material, a customer is advised to consult the MSDS for
the product under consideration for use.
H110MA FOR INJECTION MOULDED PRODUCTS
Repol H110MA is recommended for Injection Moulding processes. Repol H110MA is an ideal choice for moulding rigid containers,
thermowares and housewares. It is also suitable as a compounding base and blending material in furniture compound. Repol H110MA
contains antistat agent that reduces static charge build-up in products.
* Typical values, not to be taken as specification. All the mechanical properties as per ASTM D638 Type I specimen injection moulded in accordance with ASTM D4101
Typical Characteristics
| Property | Test Method | Units | Values |
| Melt Flow Rate (230°C/2.16 kg) | ASTM D1238 | g / 10 min | 11 |
| Tensile Strength at Yield (50 mm/min) | ASTM D638 | MPa | 36 |
| Elongation at Yield (50 mm/min) | ASTM D638 | % | 10 |
| Flexural Modulus (1% secant) | ASTM D790A | MPa | 1650 |
| Notched Izod Impact Strength (23°C) | ASTM D256 | J/m | 27 |
| Heat Deflection Temperature (455 kPa) | ASTM D648 | oC | 104 |
Applications
Rigid packaging, furniture & houseware
Regulatory Information
• Meets the requirements stipulated in IS 10910 on ‘Specification for Polypropylene and its Copolymers for safe use in contact with
foodstuff, pharmaceuticals, and drinking water. Additives incorporated in this grade conform to the positive list of constituents
as prescribed in IS 10909. The grade and the additives incorporated in it also comply with the FDA:CFR Title 21,177.1520,
Olefin polymers
Storage Recommendations
• Bags should be stored in dry/closed conditions at temperatures below 50°C and protected from UV / direct sunlight
M110 Polypropylene Homopolymer
Characteristics
M110 is a Polypropylene Homopolymer, produced by the latest generation Spheripol II Technology. This homopolymer is primarily suitable for the Injection Molding Process. M110 combines exceptional processability with low Cycle Time, high Gloss & excellent Color & Processing Stability.
Application
• General Purpose Injection Molding
• Furniture
| Properties | Test Method | Units | Values |
| Melt Flow Index (2.16 kg & 2300 C) | ASTM D1238 | g / 10 min | 11 |
| Density (at 23 0 C) | ASTM D 1505 | G/cm3 | 0.9 |
| Tensile Strength at Yield (50 mm/min) | ASTM D638 | MPa | 28 |
| Tensile Elongation at Yield (50 mm/min) | (Type I – with Extensometer) | % | >600 |
| Flexural Modulus | ASTM D 790A | MPa | No Break |
| Notched Izod Impact Strength (23°C) | ASTM D 256A | J/m | 1000 |
| Vicat Softening Point (10N) | ASTM D 1525 | oC | 64 |
| Heat Deflection Temperature (0.455 MPa) | ASTM D 648 | oC |
Mechanical properties are tested on Injection Molded Test Specimens prepared as per ASTM D 4101
Polypropylene Homopolymer Injection Molding
Product Description:
PP Homopolymer 1110MG is a natural colored grade produced by the latest Spheripol II Technology. The Grade is having a High flow, high rigidity and excellent gloss.
Recommended Applications:
PP Homopolymer 1110MG is recommended for
Injection Molded applications like
• Rigid Packaging,
• Household articles
• Furniture
Typical Properties:
| Tested Properties | Test Method | UOM | Values* |
| Resin Properties | |||
| Melt Flow Index (2300C & 2.16 Kg) | ASTM D 1238 | gm/10 min | 11.0 |
| Density @ 23oC | ASTM D 1505 | gm/cm3 | 0.90 |
| Mechanical Properties | |||
| Tensile Strength @ Yield (50 mm/min) | ASTM D 638 | MPa | 40 |
| Elongation @ Yield (50 mm/min) | ASTM D 638 | % | 8 |
| Flexural Modulus (1.3 mm/min) | ASTM D 790 | MPa | 1550 |
| Notched Izod Impact Strength @ 23oC | ASTM D 256 | J/m | 21 |
| Thermal Properties | |||
| Heat Deflection Temperature (0.46 N/m2) | ASTM D 648 | oC | 100 |
| Vicat Softening Point (10 N) | ASTM D 1525 | oC | 154 |
* Typical values not to be construed as specification limits. Values may change without any prior notice.
* Mechanical properties tested on specimen molded as per ASTM D 4101 and conditioned as per ASTM D 618.
Recommended Processing Temperature: 170 – 230 oC
Packaging Information:
This material is packed and available in raffia bags with net content of 25.0 Kg only. The raffia bags used conforms to the minimum strength requirements of BIS, however, customer shall take due care while handling the bag. Prolonged exposure of these bags to sunlight may deteriorate the bag’s performance and cause spillage and wastage. IOCL does not warranty loss of material due to poor material handling practices.
Regulatory Information:
PP Homopolymer 1110MG shall meet the requirements stipulated in IS 10910 on ‘Specification for Polypropylene and its Copolymers
for safe use in contact with Foodstuff, Pharmaceutical & Drinking water’. The grade and Additives incorporated in this grade shall
meet the positive list of constituents as prescribed in IS 10909. The Grade and the additives incorporated in it will also comply with
the FDA: CFR Title 21,177.1520, Olefin Polymers.
Storage & Handling:
Prevent PP Material from direct exposure to sunlight & heat to avoid quality deterioration. The storage location should be dry, dust-free and the Storage temperature should not exceed 50 oC. Non – compliance to these precautionary measures can lead to degradation of the product causing Color changes, Odor & inadequate product performance. It is advised to process PP material within 06 months Product Technical Datasheet
after delivery.
Polypropylene Homopolymer Injection Molding
Product Description:
PP Homopolymer 1110MAS is a natural colored grade
produced by the latest Spheripol II Technology. The
Grade is having a High flow & high stiffness and
excellent gloss. This grade contains antistatic agent that
reduces static charge build up in products. This grade
is designed to offer faster molding cycles and the ability
to achieve cycle time reduction of up to 18%
(Depending on product & equipment). This grade is
ideal for products requiring very good dimensional
stability (low warpage).
Recommended Applications:
PP Homopolymer 1110MAS is recommended for Injection
Molded applications like
• Furniture
• Household articles
• Automotive component (where high stiffness is
required)
Typical Properties:
| Tested Properties | Test Method | UOM | Values* |
| Resin Properties | |||
| Melt Flow Index (2300C & 2.16 Kg) | ASTM D 1238 | gm/10 min | 11.0 |
| Density @ 23oC | ASTM D 1505 | gm/cm3 | 0.90 |
| Mechanical Properties | |||
| Tensile Strength @ Yield (50 mm/min) | ASTM D 638 | MPa | 42 |
| Elongation @ Yield (50 mm/min) | ASTM D 638 | % | 8 |
| Flexural Modulus (1.3 mm/min) | ASTM D 790 | MPa | 1800 |
| Notched Izod Impact Strength @ 23oC | ASTM D 256 | J/m | 30 |
| Thermal Properties | |||
| Heat Deflection Temperature (0.46 N/m2) | ASTM D 648 | oC | 115 |
| Vicat Softening Point (10 N) | ASTM D 1525 | oC | 154 |
* Typical values not to be construed as specification limits. Values may change without any prior notice.
* Mechanical properties tested on specimen molded as per ASTM D 4101 and conditioned as per ASTM D 618.
Recommended Processing Temperature: 170 – 230 oC
Packaging Information:
This material is packed and available in raffia bags with net content of 25.0 Kg only. The raffia bags used conforms to the minimum strength requirements of BIS,
however, customer shall take due care while handling the bag. Prolonged exposure of these bags to sunlight may deteriorate the bag’s performance and cause
spillage and wastage. IOCL does not warranty loss of material due to poor material handling practices.
Regulatory Information:
PP Homopolymer 1110MAS shall meet the requirements stipulated
in IS 10910 on ‘Specification for Polypropylene and its Copolymers
for safe use in contact with Foodstuff, Pharmaceutical & Drinking
water’. The grade and Additives incorporated in this grade shall
meet the positive list of constituents as prescribed in IS 10909. The
Grade and the additives incorporated in it will also comply with the
FDA: CFR Title 21,177.1520, Olefin Polymers.
Storage & Handling:
Prevent PP Material from direct exposure to sunlight & heat to avoid quality
deterioration. The storage location should be dry, dust free and the Storage temperature
should not exceed 50 oC. Non – compliance to these precautionary measures can lead to
degradation of the product causing Color changes, Odor & inadequate product
performance. It is advised to process PP material within 06 months after delivery.
